|
GO BACK
This switch provides control for a
station when the "DC Brake Generator™"
is set for automatic:
This switch uses a unique control
scheme and is designed for a station where two lines enter a station and then
merge to one line as they depart.
 |
If the Station is vacant, the
first train to enter the station on either line will be stopped using CV4
and held to "meet" another train. (This switch is designed
assuming that a second train will arrive on the adjacent line!)
|
|
When a second train enters the
adjacent line it will be stopped and the first train will depart the station
to the main line using the acceleration value CV3.
|
|
When the first train is clear of
the next forward block the second train will be released to the main line
using acceleration value CV3. |
In any case the trains in that
the station can be sent new commands for speed changes, lights, sound etc.. If a
BitSwitch has stopped an engine, the new command will not be activated
until the train is released
GO BACK
| 
