BitSwitch controls include an adequate number of track contacts for installation.  The track contacts are magnetic reed switches and are connected by soldering leads to the reed switches. 

Magnets are not included and must be purchased separately.

G-Scale Track Contacts

For Large Scale Track mounted Track Contacts are available at an extra charge.
These contacts are reed switches mounted on a small circuit board
suitable for concealment inside the hollow RR Ties found on LGB and Aristo Track.
For use as BitSwitch Triggers
or
for turnout control using
DCC Accessory Decoders such as
 NCE Switch-Kat, Switch-It or Snap-it

Regular G-Scale Track contact with 3" leads $4.50/ea

Regular G-Scale Track self solder leads $4.50/ea

Diode Control for AC Powered Bi-Polar LGB, Aristo
or any
2 lead DC Turnout Motor.

Track Contacts with Diodes
$4.50 Each
See individual products to determine number required
Available with 3" leads or with no leads for
those who want to attach longer leads

Track Contact W/Diode and screw Term $4.50

Track Contact W/Diode & 3 inch Leads $4.50

Track Contact W/Diode Self Solder Leads $4.50