|
|
|
COMPONENT
PRICES
PRE-BUILT Includes assembly and wiring of a Lexan Panel with the BitSwitch products mounted and pre-wired to barrier strips for easy installation. The only end user installation required is the connection of each "Logical Segment" (block) of track to the labeled track power barrier strip and the corresponding track contacts. Accessories: Magnets $2.00 Contact magnets are sold separately and vary depending on the scale of trains. For trains scale N to HO the magnets can be completely hidden inside a boxcar, coal hopper etc. and need not be visible. Larger scales can use flat tape magnets on the bottom of engines if desired. "DCC BitSwitches™" are supplied with complete wiring diagrams and with the required number of track contacts. (G-scale outdoor contacts not included) Normally BitSwitches will be installed at the same location as the command station and power boosters however weather resistant protective boxes are required for BitSwitches that will be installed outdoors. Warranty:
Compatibility: "DCC BitSwitches™" are designed to operate with locomotives using decoders that comply with NMRA DCC Standard RP-9.2.4 as described in NMRA Publication"Digital Command Control the comprehensive guide to DCC" Chapter 7.9 "Stopping locomotives in front of a red signal". Any decoders that support conversion between DCC and analog DC should function satisfactorily. Lenz, Digitrax support conversion. Some manufacturer's decoders do not support conversion i.e. Soundtraxx does not support DC and therefore require an additional Power Booster to function with DCC BitSwitches. "DCC BitSwitches™" function the same for all Scales N thru G however the variations of transformer voltages require that you order the correct version.
|
1 year "DCC BitSwitches™"
are unconditionally guaranteed against failure due to normal use or as a result
of installation error. Returned switches will be repaired or replaced at no charge.